Thursday, February 15, 2018

How to Sew Doll Clothes: Fully lined bolero jacket in fur

valspierssews doll clothes patterns



doll clothes by valspierssews


I have been practicing with lining a lot lately. If you want to get better at lining then you just have to  give it a go. This little jacket is part of a design I am working on that has a jacket with a collar and long sleeves. It will also have a curved front bolero.
If you follow what I make you will probably recognise this pink jacket from a while back.



I just wanted to experiment with fur before publishing it.

I have added photos to show what I did. If you haven't done lining before you will need to get used to turning things odd ways and making funny shapes.

I put 2 back pieces together to make one piece so I could
cut the fur in one layer rather than trying to fold it.

Make sure you cut it so the fur lays in the right direction.
This one smooths downwards.

Stitch the shoulder seams and trim the fuzz a bit.

Fold one centre back seam allowance of the lining to the
inside and press.

Place the folded seam on top of the other seam and stitch
at the top and bottom to hold it in place.

Line up the main and lining at the neck and the sleeve hem edges.
Stitch it. rim the corners a bit and clip the curve of the neck.

Turn it right sides out.

Bring the side seams together at the lining...

... and the main. Stitch both side seams. It is a bit tricky
to get past the underarm with all that fur. Just make sure you go
far enough in then with the needle down, lift the foot and turn
to angle down the rest of the seam.

Both side seams done. Now I am going to finish the hem edge.

Bring the hem edges together by pulling them away from each
other and rolling them around the rest of the jacket. Push the sleeve
parts out of the way as best you can so you have room to stitch
without catching the inside bits.

Pin it along the hem edges. Stitch it all the way across.
If you are not using fur you can cut the back lining on the fold and leave a gap in the hem edge
for turning that you can finish as you top stitch around the jacket. This method doesn't work for fur because you can't just turn in the seam allowance with all the fur pile in the way. 

Use the gap in the centre back of the lining to pull it rights sides out.
First one side then the other.

Hand stitch the centre back seam of the lining.

It looks great just edge to edge.
I had a beautiful coat clasp that I thinks looks great.

You can get the Bolero Collection in my Etsy shop. It has 4 styles that include different shaped boleros and a jacket with sleeves.






Happy Doll Dressmaking,
Val


No comments:

Post a Comment

Note: Only a member of this blog may post a comment.